Magnet for mounting the Hohlwanddübel-PLUS "M" (Item No. HWDPM16) or Hohlwanddübels-PLUS Massivwand "M" (Item No. HWDPMMW16) on steel formwork.
Plaster support panel made of galvanised sheet steel. Tight meshes ensure better plaster anchorage. Very robust and resistant due to the 8 mm high ribs, but still easily deformable. Easily adaptable to all geometric shapes.
Corrosion-free plastic anchor made of high-strength polyamide for tie rods with DYWIDAG thread 15 mm. In combination with the Sichtbetonkegel Universal ( Item No. SBKU2226GB) also suitable for fair-faced concrete. Delivery including nail plug for fair-faced concrete. Tested according to DIN 18216:2021-02, test report available on request.
NEVO-CONNECT® the innovative screw connection for prefabricated reinforced concrete components enables direct screwing of reinforced concrete components for all standard connections of large panel construction. NEVO-CONNECT® combines the advantages of a dry connection with the requirements for the lowest possible assembly tolerances and the qualification of the staff used. The anchor block enables the connection of the system screws and with this the connection to the screw guide during the assembly of the wall elements.
Concrete screw MULTI-MONTI®-plus SSK 16 x 130 mm hexagon head with pressed-on washer and cone, SW-24, galvanised blue, A2K for use with Hohlwanddübel-Plus (Art. No. HWDP16 and HWDPM16) and 16 x 90 mm for use with Hohlwanddübel-Plus Massivwand (Art. No. HWDPMW16 and HWDPMMW16).
Mounting set with accessories for on-site assembly of solid and double walls. Standard mounting set consisting of: - 30 MULTI-MONTI®-plus SSK 16 x 130 mm screws - 60 each of UP02, UP03, UP05, UP10, UP20 leveling shims Customised mounting sets on request.
Hohlwanddübel-Plus for temporary fastening of props and corner brackets on double and solid walls in the assembly state. The Hohlwanddübel-Plus is positioned on the steel formwork with the reusable magnet. After stripping the formwork, the magnet usually remains on the formwork due to its high adhesive force. Only the approved MULTI-MONTI®-plus SSK 16 x 130 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. Supplied without magnet, screw and washer.
FORMWORK TUBE MONOTUB RUND "GLATT" Flexibility: Any dimension from Ø 150 mm to Ø 1,200 mm and any length available within 2 to 3 working days. Delivered to construction site in customised lengths. Quality: Suitable for exposed concrete quality SB4. According to the DBV leaflet "Fair-faced concrete", the creation of a test area is required for SB4 or strongly recommended for SB3. 100% waterproof, therefore outdoor storage and installation possible in all weather conditions. With formwork pipes from Ø 650 mm, 2 vertical joints of the PVC insert are visible. Economy: One concreting date for many columns. This ensures optimum construction progress. Extremely light and easy to handle during transport and assembly. No crane required in most cases. Columns can be stripped in seconds using a ripcord. No risk of damage to the exposed concrete surface. Environmentally friendly: Cleaning and return transport of the formwork is not necessary. No formwork oil required. Problem-free disposal.
FORMWORK TUBE MONOTUB RUND "SPIRAL" Flexibility: Any dimension from Ø 150 mm to Ø 1,200 mm and any length available within 2 to 3 working days. Delivered to construction site in customised lengths. Quality: Suitable for exposed concrete quality SB4. According to the DBV leaflet "Fair-faced concrete", the creation of a test area is required for SB4 or strongly recommended for SB3. 100% waterproof, therefore outdoor storage and installation possible in all weather conditions. With formwork pipes from Ø 650 mm, 2 vertical joints of the PVC insert are visible. Economy: One concreting date for many columns. This ensures optimum construction progress. Extremely light and easy to handle during transport and assembly. No crane required in most cases. Columns can be stripped in seconds using a ripcord. No risk of damage to the exposed concrete surface. Environmentally friendly: Cleaning and return transport of the formwork is not necessary. No formwork oil required. Problem-free disposal.
FORMWORK TUBE NEVOTUBE® “RECHTECK“ Flexibility: Every producible dimension available within 2 to 3 working days. Delivered to construction site in customised lengths. Lengths of up to 12.5 m have already been realised. Quality: Suitable for exposed concrete quality SB4. According to the DBV leaflet "Fair-faced concrete", the creation of a test area is required for SB4 or strongly recommended for SB3. Resistant to direct exposure to moisture. No horizontal joints of the inner liner up to a length of 4 m. Economy: One concreting date for many columns. This ensures optimum construction progress. Extremely light and easy to handle during transport and assembly. No crane required in most cases. Columns can be stripped in seconds using a knife. No risk of damage to the exposed concrete surface. Environmentally friendly: Cleaning and return transport of the formwork is not necessary. No formwork oil required. Problem-free disposal.
FORMWORK TUBE NEVOTUBE® “SCHARFE KANTE“ Flexibility: Every producible dimension available within 2 to 3 working days. Delivered to construction site in customised lengths. Lengths of up to 12.5 m have already been realised. Quality: Suitable for exposed concrete quality SB4. According to the DBV leaflet "Fair-faced concrete", the creation of a test area is required for SB4 or strongly recommended for SB3. Resistant to direct exposure to moisture. No horizontal joints of the inner liner up to a length of 4 m. Economy: One concreting date for many columns. This ensures optimum construction progress. Extremely light and easy to handle during transport and assembly. No crane required in most cases. Columns can be stripped in seconds using a knife. No risk of damage to the exposed concrete surface. Environmentally friendly: Cleaning and return transport of the formwork is not necessary. No formwork oil required. Problem-free disposal.
FORMWORK TUBE NEVOTUBE® “WANDANSCHLUSSSÄULE“ Flexibility: Every producible dimension available within 2 to 3 working days. Delivered to construction site in customised lengths. Lengths of up to 12.5 m have already been realised. Quality: Suitable for exposed concrete quality SB4. According to the DBV leaflet "Fair-faced concrete", the creation of a test area is required for SB4 or strongly recommended for SB3. Resistant to direct exposure to moisture. No horizontal joints of the inner liner up to a length of 4 m. Economy: One concreting date for many columns. This ensures optimum construction progress. Extremely light and easy to handle during transport and assembly. No crane required in most cases. Columns can be stripped in seconds using a knife. No risk of damage to the exposed concrete surface. Environmentally friendly: Cleaning and return transport of the formwork is not necessary. No formwork oil required. Problem-free disposal.
