Cast iron anchor for tie rods with DYWIDAG thread 15 mm. For the production of anchorages in concrete.
A real all-rounder in our range.
The ribbed expanded metal made of galvanised sheet steel is used as permanent formwork. Due to the rib height of approx. 21 mm and the special profiling, it is extremely strong and ensures a perfect bond of the construction joints.
The universal solution for all side protection tasks. A multitude of possible combinations save time and money.
Plastic lid for closing the cavities of hollow core slabs to prevent them from filling with concrete. Universal lid suitable for all machine manufacturers for hollow core slabs, such as Elematic, Weiler, Kähler, etc.
Test sleeve (No. 47794) for the concrete screw MULTI-MONTI®-plus SSK 16 x 130 mm and 16 x 90 mm.
Mounting set with accessories for on-site assembly of solid and double walls. Standard mounting set consisting of: - 30 MULTI-MONTI®-plus SSK 16 x 130 mm screws - 60 each of UP02, UP03, UP05, UP10, UP20 leveling shims Customised mounting sets on request.
Magnet for mounting the Hohlwanddübel-PLUS "M" (Item No. HWDPM16) or Hohlwanddübels-PLUS Massivwand "M" (Item No. HWDPMMW16) on steel formwork.
Hohlwanddübel for temporary fastening of props and corner brackets on double and solid walls in the assembly state. The Hohlwanddübel is positioned on the formwork at the factory using hot glue. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot glue. Alternatively, the Hohlwanddübel can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot glue runs into the screw guide! A wood screw DIN 571, Ø 12 x 70 mm is used for attachment of the prop to the Hohlwanddübel. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw and washer.
Multiple use for safe, fast and cost-efficient transport of material.
Hohlwanddübel-Plus for temporary fastening of props and corner brackets on double walls in the assembly state. The Hohlwanddübel-Plus is positioned on the formwork at the factory using hot-melt adhesive. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot-melt adhesive. Alternatively, the Hohlwanddübel-Plus can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot-melt adhesive runs into the screw guide! Only the approved MULTI-MONTI®-plus SSK 16 x 130 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw.
Plastic coupling for combination of tie rod sleeves and fibre-reinforced concrete tubes. Suitable for tubes with Ø 22 mm.
