UTC-6727.FPR, UTC-6737.FPR UTC-6747.FPR and UTC-6757.FPR models Automatic Four Column Compressıon Testıng Machines are manufactured for compression testing of cubes and cylinders acc. to EN. These machines also meet the requirements of CE norms with respect to the health and safety of the operator. The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of fixtures or/and concentric centering lines of lower loading platen, the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). The Machines consist of a welded steel frame (see table) and UTC-4830FPR automatic hydraulic power pack with U-Touch PRO Control Unit. Main Features Pace Rate control between 1 kN to 25 kN Accuracy Class 1 acc. to EN 12390-4 starting from with the 5% of the machine capacity (Special calibration option Class 1 starting from 1% of the full range with UTC-0210) Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4 Tests automatically with closed loop control Load measurment with a pressure transducer U-Touch PRO Control Unit for Automatic Compression / Flexure Testing Machines U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve. Safety Features Maximum pressure valves to avoid machine overloading Limit switch for piston stroke Emergency stop button Removable transparent front and rear safety doors Software controlled maximum load value
Steel beam moulds are manufactured in accordance with dimensions and tolerances stated in the related standards.
UTEST offers a wide range of High Quality Testing Sieves which are used in all types of sieve testing applications, from sampling and classification of soils, aggregates and other powdered and granular materials. UTEST testing sieves are of the highest quality to ensure consistent fit, accurate specifications and durable construction. Woven Wire Cloth and Perforated Plate Sieves are supplied in 200 mm and 300 mm frame diameters in various nominal aperture sizes suitable for several applications and standards. Wet Washing Sieves are used for wet testing of various materials enabling to wash the fines through the sieve without losing any of the sample. Wet Washing Sieves are available in 200 mm diameter with 100 mm and 200 mm deep models. All parts of testing sieves are manufactured from stainless steel. Receiving Pans and Lids are available in stainless steel with 200 mm and 300 mm diameters.
The apparatus is used for determining the stiffening time of repair products and systems comprising hydraulic based mortar and concrete (CC), including those modified by the addition of polymers (PCC) and workable life of fresh mortar after the mixing procedures. The Apparatus consist of a vertical loading pillar with a base. Supplied complete with a brass penetration rod with washer and a sample container (Ø80x80 mm aluminum). UTC-0705 Needle Set for concrete setting time test acc.to ASTM should be ordered separately UTW-0637 Digital Balance for the initial setting time, workable life and stıffening time should be ordered separately, as well. Also, for determining concrete final setting time, instead of UTW-0637, UTW-0654 should be ordered separately.
The UTEST fixed amplitude vibrating tables are compact units providing controlled vibro-compaction forcube or cylinder moulds. Vibrating tables consist of vibrating motor, command unit and clamping assembly. For laboratory use the table is availablein two alternative model. The small table accepts 2, large table accepts 6 cube or cylinder moulds by using clamping assembly. UTC-0900 and UTC-0910 tables can also be used for beam moulds. For on site applications, portable UTC-0920 Vibrating Table is designed for preparing the cube or cylinder specimens by vibration. 1 or 2 pcs. cube or cylinder mould can be clamped on the table depending on outer size of the mould to be used. UTC-0920 Vibration Tables are supplied complete with a converter (DC 12 to 220V).
EN 12504-2, 13791; ASTM C 805; D 5873; BS 1881:202; NF P18-417; DIN 1048; UNI 9189 The quality of concrete is mainly judged by its compressive strength directly affecting the load-bearing capacity and durability of concrete structures. UTC-3028 Concrete Test Hammer (Schmidt Hammer N Type UTEST) is used to measure the compressive strength characteristics of hardened concrete non-destructively, control uniform concrete quality and detect weak spots in the concrete. The test object should have a minimum thickness of 100 mm (3.9 in). The impact area of UTC-3040 Calibration Anvil used for the calibration of concrete test hammers is hardened minumum 52HRC.
The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of concentric centering line/s of lower bearing block the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). Pressing the START button on the control unit. The machine automatically starts the rapid approach, when the specimen touches the upper platen the rapid approach is ended and starts loading at the pace rate that selected by user and stops once the specimen fails. Automatically saves the test parameters and test results. The Machines consist of a welded steel frame ( see table), hydraulic power pack with U-Touch PRO Control Unit. Main Features Safety Features U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve.
The UTC-0650 and UTC-0651 Air Entrainment Meters are used for determining the air content of fresh concrete.They consist of a flanged 7 or 8 liter capacity cylindrical vessel and cover assembly incorporating a pressure gauge, air pump and valves.They have a quick action clamping system. Direct pressure gauge reading to the nearest 0.1% up to 6% air, 0.2% from 6 to 8% air and % 0.5 from 8 to 15%air. It is not affected by changes in barometric pressure. Calibration vessels and compacting bar with square section should be ordered seperately.
There are two models of the Cement Flow Table according to ASTM and EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Also manual and motorized models are available. The hand operated model is fitted with a hand wheel. The motor operated model is driven by a motor speed reducer through a mechanical coupling at the rate of 1 revolution per second. The number of drops is preset on a counter and the machine stops automatically at the end of the cycle. EN model, the table is manufactured from stainless steel and has a 300 mm diameter table. The conical mould is made of stainless steel and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height. ASTM model; the table is manufactured from bronze and has 254 mm diameter. The conical mould is made of brass has dimensions of 100 mm base dia. X 70 mm top dia. X 50 mm height. Both models are supplied complete with stainless steel flow mould and tamper. EN model also has a stainless steel hopper.
UTC-5729.FPR and UTC-5739.FPR models Automatic Compressıon Testıng Machines are manufactured for compression testing of masonary units, cubes and cylinders acc. to EN standards .These machines also meet the requirements of CE norms with respect to the health and safety of the operator. The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of fixtures or/and concentric centering lines of lower loading platen, the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). The Machines consist of a welded steel frame (see table) and UTC-4830FPR automatic hydraulic power pack with U-Touch PRO Control Unit. Main Features Pace Rate control between 1 kN to 25 kN Accuracy Class 1 acc. to EN 12390-4 starting from with the 5% of the machine capacity (Special calibration option Class 1 starting from 1% of the full range with UTC-0210) Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4 Tests automatically with closed loop control The tests can be performed by controlling the machine either on U-Touch PRO control unit (UTC-4930.FPR) or on a computer with using free UTEST Software (USOFT-4830.FPR) which is provided free of charge with the machines. Load measurment with a pressure transducer Hydraulic pump with dual stage for rapid approach Welded steel walled frame with a single acting piston Piston return at the end of test automatically U-Touch PRO Control Unit U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve. Safety Features Maximum pressure valves to avoid machine overloading Limit switch for piston stroke Emergency stop button Removable transparent front and rear safety doors Software controlled maximum load value EN 12390-4 and EN 772-1 COMPRESSION TESTING (d*) depth (**) Limited by capacity of the frame The machines for masonary units, cubes and cylindrs are supplied complete with; • • • • Removable transparent front and rear safety doors Appropriate Distance piece/s for the cylinder and cube specimens with the height of lower than 150 mm should be ordered separately.
Hard plastic and steel cylinder moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Two part and clamp attached base plate cast iron, plastic and steel moulds are designed to be durable, corrosion resistant and easy to clean.
All moulds have been manufactured from steel except UTCM-0898 molded using engineered plastic and all internal surfaces are machined. Minimum surface hardness of UTCM- 0892.4 is HV400 which is recommended by the EN standard. All moulds surfaces are protected with anti-corrosion oil. The webs of UTCM- 0892.4 and UTCM-0899A are matchmarked. Minimum surface hardness of UTCM-0892.2 is HV200.
